LG 24K BTU Ceiling Concealed Single Ductable Inverter Air Conditioner R410 ABNW24GM1S2 + ABUW24GM1S2

LG 24K BTU Ceiling Concealed Single Ductable Inverter Air Conditioner- Powerful

Key Features

• Inverter system technology
• Energy Saving
• Fast cooling
• Minimised Height
• E.S.P (External Static Pressure) Control
• High Head Drain Pump

What Comes In The Box

• LG ceiling concealed ductable indoor unit
• LG outdoor unit

The LG 24K BTU ceiling concealed single ductable inverter air conditioner is a powerful and practical cooling and heating solution designed for spaces where comfort and interior appearance matter. This LG 24K BTU air conditioner combines inverter system technology, energy saving operation, fast cooling, minimized height, external static pressure control and a high head drain pump to provide flexible climate control through a concealed duct installation.

The ceiling concealed design keeps the main indoor unit out of direct view. As a result, the room can maintain a clean and refined appearance without the visual presence of a conventional wall mounted indoor air conditioner. Instead, the cooling or heating air can move through a suitable duct arrangement while the indoor unit remains concealed above the ceiling.

This LG ductable inverter air conditioner carries the model combination ABNW24GM1S2 and ABUW24GM1S2. The system uses R410A refrigerant and operates on a 220 to 240 volt, single phase, 50 Hz electrical supply. Therefore, it offers a configuration intended for suitable fixed installations where concealed ducted temperature control is preferred.

LG 24K BTU Air Conditioner Capacity

The LG 24K BTU air conditioner provides a rated cooling capacity of 24400 BTU per hour under one listed cooling condition. Its cooling capacity can operate from 9600 BTU per hour at the minimum level to 26000 BTU per hour at the maximum level.

This variable capacity range works together with inverter technology to provide adaptable cooling performance. Instead of relying only on a fixed operating level, the system can adjust its output according to operating requirements.

The product also provides a second rated cooling specification with a capacity range from 9600 BTU per hour to 26000 BTU per hour and a rated figure of 19600 BTU per hour. These specifications show that the system offers different capacity ratings depending on the applicable cooling measurement condition.

The heating function also provides substantial capacity. Heating performance ranges from 9600 BTU per hour to 27000 BTU per hour, with a rated heating capacity of 25200 BTU per hour.

Therefore, this is not simply a cooling system. It provides both cooling and heating operation, making it suitable for installations that require year round temperature control.

LG Ceiling Concealed Ductable Air Conditioner Design

Concealed Ceiling Installation

One of the defining attributes of this LG ceiling concealed air conditioner is its ductable design. The indoor unit can remain concealed within a ceiling installation rather than occupying a visible position on a wall.

This approach can support a cleaner interior appearance. For example, spaces that place a strong emphasis on architectural design can use concealed air distribution while keeping the main air conditioning equipment out of sight.

The concealed configuration can also provide greater freedom when planning the interior. Instead of positioning the indoor unit around furniture, wall space or decorative elements, the system can work through an appropriate duct arrangement.

As a result, the LG ductable air conditioner can be considered when appearance, space planning and centralized air distribution are important parts of an installation.

Minimized Height For Limited Installation Spaces

The minimized height is another important attribute of this LG 24K BTU ductable air conditioner. The indoor unit measures 900 millimetres in width, 270 millimetres in height and 700 millimetres in depth.

The 270 millimetre height helps support installations where available ceiling space has limitations. This can be especially useful when the space above the ceiling contains other building services that compete for installation room.

However, the actual installation still requires suitable clearance and professional planning. The dimensions of the indoor unit should therefore be considered together with the ductwork, drainage arrangement and other installation requirements.

Flexible Air Intake Arrangement

The product also supports flexible installation for the applicable low static duct configuration. The air intake can be arranged from the rear or from the bottom depending on the installation condition.

This feature can make the system more adaptable during installation. Consequently, installers have greater flexibility when working around the physical structure of the ceiling space.

The intake arrangement should still follow the appropriate installation requirements. Proper positioning can help maintain suitable airflow and support reliable operation.

LG Inverter Air Conditioner Technology

Inverter System Operation

The LG 24K BTU air conditioner uses inverter system technology. Inverter operation is an important part of the product because the system can vary its operating capacity rather than relying on a simple fixed output approach.

This can help the air conditioner respond to changing cooling or heating requirements. When the space requires more capacity, the system can operate at a higher level. When the required temperature becomes more stable, the system can reduce its operating output.

As a result, inverter technology can support more consistent temperature management while helping the system avoid unnecessary full capacity operation.

Energy Saving Performance

Energy saving is one of the key features highlighted for this LG ductable inverter air conditioner. The system has a rated cooling power input of 2.22 kilowatts under one listed cooling condition and 2.25 kilowatts under another listed cooling condition.

The rated heating power input is 1.95 kilowatts.

The product also has a cooling EER of 11.00 and a heating COP of 3.80 under the specified rating conditions. These figures provide useful information when evaluating the relationship between the system input and its cooling or heating performance.

In practical terms, the inverter system and rated efficiency figures can make this model an attractive option for installations where energy consumption matters.

However, actual electricity use depends on several factors. These include operating conditions, temperature settings, usage duration, building characteristics and installation quality.

LG 24K BTU Fast Cooling Performance

High Cooling Capacity

The LG 24K BTU ductable inverter air conditioner is designed to deliver substantial cooling capacity. Its maximum listed cooling capacity reaches 26000 BTU per hour.

This capacity provides flexibility when cooling requirements change. During periods when the indoor environment requires stronger cooling, the system can increase its output within its specified operating range.

The fast cooling feature listed for the product also supports its focus on bringing indoor conditions toward the desired temperature efficiently.

Variable Cooling Range

The cooling range begins at 9600 BTU per hour and reaches 26000 BTU per hour. This wide operating range works well with inverter technology because the system can adjust its output according to demand.

Consequently, the air conditioner does not need to remain at maximum capacity whenever maximum cooling is unnecessary.

This variable approach can contribute to a more controlled indoor environment. It can also support more efficient operation when the cooling requirement decreases after the desired temperature has been reached.

LG External Static Pressure Control

E S P Control For Ducted Airflow

External static pressure control is one of the most useful features of this LG ceiling concealed air conditioner. The E S P function allows the air volume to be controlled through the remote controller.

This is important for a ducted system because airflow performance can change depending on the resistance created by the duct arrangement.

The system uses a BLDC fan motor that can control fan speed and air volume according to the external static pressure. Therefore, the air conditioner can provide greater flexibility when managing airflow through the duct system.

BLDC Fan Motor

The indoor unit uses a BLDC fan motor. The outdoor unit also uses a BLDC fan motor.

The BLDC motor contributes to the system’s ability to control fan speed and airflow. This works together with the external static pressure function to support ducted air distribution.

The indoor fan airflow rates are listed at 18.0 cubic metres per minute at high speed, 16.5 cubic metres per minute at medium speed and 14.5 cubic metres per minute at low speed.

These different airflow levels provide flexibility when adjusting the system to the required operating condition.

External Static Pressure Rating

The indoor unit has an external static pressure high mode factory setting of 59. This specification is particularly relevant to duct installation because static pressure affects the ability of air to move through a duct network.

For this reason, professional installation and proper duct design remain important. The E S P function provides control, but the duct arrangement still needs to match the installation requirements.

LG Two Thermistors Temperature Control

Dual Temperature Sensing

The LG ceiling concealed ductable air conditioner features two thermistors for temperature control. The system can check indoor temperature through the thermistors located in the remote controller and indoor unit.

This arrangement can help the system understand temperature conditions from different positions.

The two thermistors can then help optimize indoor air temperature. As a result, the system can provide a more responsive approach to temperature management than relying on a single sensing position.

Improved Temperature Management

Temperature can vary between different areas of a room. A sensor located close to the ceiling, for example, can experience different conditions from a sensor positioned closer to the occupied area.

The two thermistor arrangement provides additional flexibility in temperature monitoring. Therefore, it can contribute to more comfortable temperature management when the system is installed and configured correctly.

LG R410A Refrigerant System

R410A Refrigerant

This LG 24K BTU ductable inverter air conditioner uses R410A refrigerant. The refrigerant specification forms part of the system design and should be considered when planning installation and maintenance.

Using the specified refrigerant helps ensure that the air conditioning system operates according to its intended configuration.

Professional technicians should handle refrigerant related installation and servicing. Proper procedures remain important for safe operation and reliable performance.

Twin Rotary Compressor

The outdoor unit uses a twin rotary compressor. This compressor type works as part of the inverter system and supports the cooling and heating functions of the air conditioner.

The combination of the twin rotary compressor and inverter technology allows the system to vary its operation according to demand.

The outdoor unit has a rated airflow of 50 cubic metres per minute through one fan. This provides the outdoor side of the system with a substantial airflow specification for heat exchange.

LG Air Conditioner Heating And Cooling

Heating Capacity

Although the LG 24K BTU air conditioner focuses strongly on cooling, it also provides heating functionality.

The heating capacity ranges from 9600 BTU per hour to 27000 BTU per hour. The rated heating capacity reaches 25200 BTU per hour.

This means the system can provide temperature control beyond cooling alone. Therefore, users can consider it for spaces where both cooling and heating capabilities are required.

Cooling And Heating Efficiency

The listed cooling EER is 11.00, while the heating COP is 3.80. These figures help describe the system’s performance relative to its energy input.

The rated heating power input is 1.95 kilowatts. Consequently, the heating function provides a useful combination of capacity and rated performance.

Actual results will depend on operating conditions and installation factors. Nevertheless, the specifications demonstrate that the system has been designed for both cooling and heating operation.

LG 24K BTU Indoor Unit Specifications

Indoor Unit Dimensions

The indoor unit measures 900 millimetres wide, 270 millimetres high and 700 millimetres deep.

Its relatively low height supports the minimized height design. This can help installers work within ceiling spaces where vertical clearance is limited.

The indoor unit weighs 25.3 kilograms.

These dimensions and weight should be considered during installation planning. The supporting structure, access points and duct connections should all accommodate the indoor unit correctly.

Indoor Airflow Levels

The indoor airflow rate is 18.0 cubic metres per minute at high speed, 16.5 cubic metres per minute at medium speed and 14.5 cubic metres per minute at low speed.

These levels give the system different airflow settings for different operating requirements.

Furthermore, the BLDC fan motor works with the E S P control function to manage airflow through the duct system.

Indoor Sound Pressure

The indoor sound pressure level during cooling is listed at 37 decibels at high speed, 35 decibels at medium speed and 32 decibels at low speed.

The same figures apply to heating, with 37 decibels at high speed, 35 decibels at medium speed and 32 decibels at low speed.

These specifications make sound performance an important consideration when planning the installation. Because the indoor unit is concealed, the installation arrangement and duct design can also influence the overall acoustic experience in the finished space.

LG 24K BTU Outdoor Unit Specifications

Outdoor Unit Dimensions

The outdoor unit measures 870 millimetres wide, 650 millimetres high and 330 millimetres deep.

It has a net weight of 44.7 kilograms.

The outdoor casing uses a warm gray finish.

These physical specifications are important when determining where the outdoor unit can be installed. The installer should consider the available space, airflow requirements and access needed for maintenance.

Outdoor Airflow

The outdoor unit has a rated airflow of 50 cubic metres per minute with one fan.

This airflow specification supports the outdoor heat exchange process required during cooling and heating operation.

The outdoor fan uses a BLDC motor. Therefore, the fan system forms part of the broader inverter based design.

Outdoor Sound Levels

The outdoor unit has a rated cooling sound pressure level of 50 decibels.

During heating, the rated sound pressure level is 52 decibels.

These figures provide useful information when selecting an outdoor installation position. The location should provide suitable ventilation while also considering the surrounding environment.

LG Ductable Air Conditioner Piping Specifications

Liquid And Gas Pipe Connections

The LG system uses a liquid side pipe connection with an outer diameter of 9.52 millimetres, which corresponds to 3/8 inch.

The gas side pipe connection has an outer diameter of 15.88 millimetres, which corresponds to 5/8 inch.

These measurements are important installation specifications. The correct piping configuration should be used to support the intended operation of the air conditioner.

Maximum Piping Length

The maximum listed piping length is 50 metres.

This provides flexibility when positioning the indoor and outdoor units within the limits of the installation design.

However, the maximum figure should not replace professional planning. The installer should consider the actual building layout and the required piping route before installation.

Maximum Height Difference

The maximum height difference between the indoor unit and outdoor unit is listed as 20 metres.

This specification gives installers a clear limit for vertical separation between the two units.

Therefore, the placement of the outdoor unit should be planned carefully when the indoor unit sits significantly above or below it.

LG 24K BTU Electrical Specifications

Power Supply

The indoor and outdoor units use a 220 to 240 volt, single phase, 50 Hz power supply.

This electrical configuration should be considered before installation. The available electrical supply should match the product requirements.

Power Supply Cable

The listed outdoor power supply cable specification is 3 core by 2.5 square millimetres.

The cable specification includes the earth connection.

Electrical installation should follow the required standards and should be completed by a qualified professional. Correct electrical preparation helps support safe and dependable operation.

LG Ceiling Concealed Air Conditioner Installation Benefits

Clean Interior Appearance

A major advantage of the LG ceiling concealed design is its ability to keep the indoor unit out of direct sight.

This approach works particularly well in interiors where visible wall mounted air conditioners may interrupt the appearance of the room.

For offices, commercial spaces, hospitality environments and carefully designed residential interiors, concealed air distribution can provide a more integrated appearance.

Better Space Planning

The concealed configuration can also help preserve wall space.

Instead of placing an indoor unit on a visible wall, the system can remain within the ceiling structure while air reaches the required areas through ductwork.

This arrangement can give designers and installers more flexibility when planning the room.

Limited Ceiling Space Support

The minimized indoor unit height of 270 millimetres can help when ceiling space is limited.

This does not mean that every ceiling can accommodate the unit. Instead, the reduced height provides a useful installation advantage when compared with larger concealed units.

The available ceiling depth should always be checked before installation.

LG Multi Space Cooling And Heating Capability

Multiple Room Air Distribution

The LG ceiling concealed duct system can support simultaneous operation for multiple spaces when used with an appropriate duct arrangement.

The system can distribute conditioned air through embedded or flexible spiral ductwork and a suitable air distribution arrangement.

Therefore, the concealed duct concept can extend beyond a single visible air outlet and support broader air distribution planning.

Flexible Duct Arrangement

The ability to work with ducted airflow makes the system adaptable to different interior layouts.

Air outlets can be planned according to the requirements of the installation. This can help distribute cooling and heating more effectively across the intended areas.

However, the final performance depends on correct duct sizing, routing and installation.

LG 24K BTU Energy Saving Attributes

Inverter Based Energy Management

Energy saving forms part of the product’s key feature set. The inverter system can adjust operating capacity according to demand.

This approach can reduce the need for continuous full capacity operation when the desired temperature has already been approached.

Therefore, the system can provide a more adaptable operating pattern than a conventional fixed output system.

Rated Efficiency Figures

The cooling EER of 11.00 and heating COP of 3.80 provide measurable efficiency information.

The system also has a rated cooling power input of 2.22 kilowatts under one listed condition and 2.25 kilowatts under another listed condition.

The rated heating power input is 1.95 kilowatts.

These figures allow users and installers to evaluate the product based on its specified performance rather than relying only on general claims about energy saving.

LG High Head Drain Pump

Drainage Support

The high head drain pump is listed among the key features of this LG 24K BTU ceiling concealed air conditioner.

Drainage forms an important part of a concealed air conditioning installation because condensation must move away from the indoor unit correctly.

A high head drain pump can support installations where the drainage route requires suitable lifting capability.

The exact drainage arrangement should follow the installation requirements. Proper drainage planning can help prevent water management problems around the concealed indoor unit.

LG 24K BTU Air Conditioner For Interior Design

Invisible Cooling Solution

The ceiling concealed approach makes the air conditioning system less visually dominant.

The indoor unit remains above the ceiling, while conditioned air moves through the duct system.

As a result, the room can retain a cleaner appearance while still benefiting from a powerful air conditioning system.

Suitable For Modern Spaces

The LG 24K BTU design can work particularly well in spaces where interior aesthetics are important.

The concealed installation concept can support modern architectural designs without requiring a prominent indoor air conditioning cabinet.

Therefore, the product offers both functional temperature control and a design focused installation approach.

LG 24K BTU Air Conditioner Overall Performance

Strong Cooling And Heating Output

The LG 24K BTU ductable inverter air conditioner provides substantial cooling and heating capacity.

Its cooling range reaches 26000 BTU per hour, while its heating range reaches 27000 BTU per hour.

This combination gives the system flexibility across different temperature control requirements.

Adaptable Airflow Control

The LG 24K BTUE S P control system, BLDC fan motor and multiple airflow levels provide useful control over ducted air distribution.

The airflow can operate at high, medium and low levels, while the external static pressure function helps manage airflow requirements within the duct system.

Consequently, the product offers a more flexible approach to ducted climate control.

Practical Concealed Installation

The LG 24K BTU 270 millimetre indoor unit height provides a useful advantage for installations with limited ceiling space.

The rear or bottom air intake option for the applicable low static duct configuration adds further installation flexibility.

Together, these attributes make the system suitable for projects where space management and concealed installation are important.

LG 24K BTU Air Conditioner Specifications Summary

Core Product Specifications

The LG 24K BTU ceiling concealed single ductable inverter air conditioner uses the ABNW24GM1S2 and ABUW24GM1S2 model combination.

It uses R410A refrigerant and a twin rotary compressor.

The system operates on a 220 to 240 volt, single phase, 50 Hz power supply.

The indoor unit measures 900 millimetres by 270 millimetres by 700 millimetres and weighs 25.3 kilograms.

The outdoor unit measures 870 millimetres by 650 millimetres by 330 millimetres and weighs 44.7 kilograms.

Performance Specifications

Cooling capacity ranges from 9600 BTU per hour to 26000 BTU per hour, with a rated cooling capacity of 24400 BTU per hour under one listed condition.

Heating capacity ranges from 9600 BTU per hour to 27000 BTU per hour, with a rated heating capacity of 25200 BTU per hour.

The cooling EER is 11.00 and the heating COP is 3.80.

The indoor airflow ranges from 14.5 cubic metres per minute at low speed to 18.0 cubic metres per minute at high speed.

Installation Specifications

The LG 24K BTU liquid pipe connection measures 9.52 millimetres or 3/8 inch.

The gas pipe connection measures 15.88 millimetres or 5/8 inch.

The maximum piping length is 50 metres.

The maximum height difference between the indoor and outdoor units is 20 metres.

The outdoor power supply cable specification is 3 core by 2.5 square millimetres.

LG 24K BTU Ceiling Concealed Air Conditioner Final Review

The LG 24K BTU ceiling concealed single ductable inverter air conditioner provides a strong combination of capacity, flexible installation and concealed design. Its inverter system technology supports variable operation, while the substantial cooling and heating ranges provide dependable temperature control for suitable installations.

The E S P control function is particularly useful for ducted applications because it allows airflow management through the remote controller. Furthermore, the BLDC fan motor supports fan speed and air volume control according to external static pressure.

The two thermistors provide additional temperature sensing capability. As a result, the system can monitor temperature from the remote controller and indoor unit to support optimized indoor temperature management.

The minimized indoor unit height also adds practical value. At 270 millimetres high, the indoor unit can suit installations where available ceiling space is limited, subject to the required installation clearances.

The system also combines cooling and heating operation. Therefore, it can provide broader temperature control than a cooling only system.

Its R410A refrigerant, twin rotary compressor, 220 to 240 volt single phase power supply, 50 metre maximum piping length and 20 metre maximum height difference provide clear specifications for installation planning.

Overall, the LG 24K BTU ceiling concealed single ductable inverter air conditioner stands out for its concealed installation design, strong cooling and heating capacity, inverter operation, airflow control and flexible ducted configuration. It is especially suited to projects where effective temperature control needs to work alongside a clean and unobtrusive interior appearance.

For buyers evaluating this system, the most important considerations include the available ceiling space, duct layout, electrical supply, piping route, drainage requirements and professional installation requirements. When these factors align with the product specifications, the system offers a capable and flexible approach to concealed air conditioning.

FAQs

1. Is the LG 24K BTU air conditioner an inverter model?

Yes. The product is listed with inverter system technology as one of its key features.

2. Is this LG air conditioner ceiling mounted?

It is a ceiling concealed duct system designed for concealed installation rather than a conventional visible wall-mounted configuration.

3. Does the LG 24K BTU AC provide heating as well as cooling?

Yes. LG describes the ceiling concealed duct system as a cooling and heating solution.

4. Does the air conditioner require professional installation?

The retailer states that installation is available at an additional cost. Professional installation is recommended for a ducted air-conditioning system.

5. Is the piping kit included with the LG air conditioner?

No. The retailer specifically states that the piping kit is not included.

6. Can the airflow be adjusted?

Yes. E.S.P. control allows air volume to be controlled through the remote controller.

7. Can this LG ducted AC be installed where ceiling space is limited?

The minimized-height design is specifically intended to provide a solution for installation in limited spaces, subject to the required installation conditions.

8. What is the price of the LG 24K BTU ductable air conditioner in Kenya?

The listed price is KES 230,000. Prices can change, so customers should confirm the current selling price before ordering.

9. Does this air conditioner have two temperature sensors?

Yes. The Two Thermistors Control feature uses temperature sensing from the remote controller and indoor unit to help optimise indoor temperature.

10. What warranty support is available for LG air conditioners?

LG Kenya’s support page for the ABNW24GM1S1 product family lists a 2-year labour warranty and directs customers to the detailed warranty policy supplied with the product.